Two-Rock Amplifiers - Classic Reverb Signature 40/20 Watt Head - Silver Chassis - Burgundy Suede w/Black Sparkle Matrix Grillcloth w/Matching 2x12" Cabinet
$6,998.00
In Stock
-
Free Shipping Eligible
The Two-Rock Amplifiers Classic Reverb Signature, here with a matching 2x12 cabinet, features a proprietary output transfer, combined with all analog tube reverb, 3 Gain Structure options and more, combine to makes this a Two-Rock build with an amazing range of tonal variability. Thanks to the master volume, combined with the High/Low Power Switch, there's plenty of headroom while not sounding starved at lower volumes, making this a fantastic, versatile 40/20 Watt amp/cab that can adapt to any studio or gigging situation.
- Head and 2x12 Cabinet in Burgundy Suede Suede with Black Sparkle Matrix Cloth
- Power Output: 40w/20w Half Power Scaling
- 40w/20w (4)6V6
- FET Circuit with Gain control
- Tone Stack Bypass
- Tube driven analog Spring Reverb with separate Send and Return controls.
- 3-position Gain Structure Switch.
- Contour control
- High/Low Power Switch
- Foot switchable FET, Bypass, and Reverb Defeat
- Passive Effects Loop
- Head Dimensions: 20 5/8"W x 12"H x 10 5/8"D (43 LBS)
- Cabinet Dimensions: 20.625″W, 30.25″T, 12″D (52 LBS)
Classic Reverb Signature 40w/20w Head Features (Descriptions Courtesy of Two-Rock)
FET GAIN - The FET (Field Effect Transistor) circuit consists of a single stage high impedance preamp/buffer. This is a very dynamic clean boost that when turned up past the 12 o’clock position can be used to boost the signal for increased gain, touch sensitivity, sustain and overdrive. This circuit can also be used to buffer the input from high output pickups. When set below the 12 o’clock position it will actually reduce the level of gain and bass, and essentially “clean up” the signal before it passes to the next stage of the amplifier.
BYPASS Switch - Referred to as Tone Stack Bypass, this switch bypasses the Bass, Middle, and Treble controls effectively turning them up all the way and increasing both the volume and perceived mid-range response. The Bright, Mid, and Deep switches remain active in the Bypass mode. This function is also foot switchable. To enable footswitch control of this function, the switch must be in the down position.
GAIN STRUCTURE - The 3-position gain structure switch alters the sensitivity and overall tonal character of the amplifier’s input stage. This is very effective for dialing in the initial gain and dynamic feel of the amplifier, and thus the way it responds to your guitar’s pickups and your playing style.
- The up position maintains the familiar Two-Rock feel and midrange response found in the Studio Signature’s legacy predecessors.
- The down position has a vintage blackface feel with a scooped midrange response and slightly less gain which can be very effective for dialing in a cleaner, bouncier tone especially with humbucker pickups.
- The middle position offers the most gain of the three positions, essentially lowering the clean headroom of the input stage and creating a more aggressive edge of breakup tone.
